0927 MATT FINISH IDRO
Building
specific products2K Matt water-thinnable transparent finish for floors
Two-component water-based matt acrylic transparent finish which, combined with a specific hardener, creates a non-yellowing film with good chemical resistance and good abrasion resistance.
→ Non-yellowing
→ Good chemical and abrasion resistance
→ Walkable and good resistance to light rubber traffic
Application
It can be used internally as a protective coating on epoxy cycles and on old, well-adhered paints that support overpainting with the product. It can also be used as a finish on new wooden parquet or on properly prepared old varnishes. The product is also resistant to light rubber traffic (not suitable for parking vehicles). Also suitable for protected exteriors, not directly exposed to the elements and prolonged contact with water.
Tools
Roller, Brush (for small portions, outlines or corners)
Technical data
Dry film aspect
matt
Sheen
20 - 30 gloss (Gardner 60°)
Dust free
45 min
Max chemical resistance
after 7 days
Allowing foot traffic
after 24 - 36 h
Recoat after
24 h
Touch dry
5 - 6 h
Dry through
24 h
Recommended thickness
40 microns of dry film, with two layers of product
→ Reduction
10 - 15% with demineralised water
→ Cover rate
7 - 9 m²/l with 2 coats
Unit size
0000 Transparent
2 L
Note
Curing ratio: 4:1 in volume
Hardener B: 4727 HARDENER FOR MATT FINISH IDRO
