1943 PAVIPIU’

Building

specific products

2K polyurethane clear coat for floors

Two-component polyurethane transparent finishing. Combined with aliphatic isocyanate, it produces a non-yellowing film, which has high gloss effect, excellent resistance to chemicals and to abrasions. It can be used both indoors and outdoors and can be applied as a protective on epoxy painting cycles for exteriors as well as on old paints, well adhering and able to accommodate over-painting with the product.
It provides good resistance to pedestrian and lift truck traffic.

Application

It is indicated for all spots where frequent cleaning and easy maintenance are required. It can also be used on a cement-based screed with anti-dust effect, as reported in Technical Data Sheet.
To obtain a satin and non-slip finishing it’s possible to add Pavipiù with the texturizing paste according to the indication given in the Technical Data Sheet. This solution is only suitable for surfaces pre-colored with epoxy enamels.

Technical data

Dry film aspect

glossy

Sheen

95 - 97 Gloss 60°

Dust free

30 min

Max chemical resistance

after 7 days

Allowing foot traffic

after 24 - 36 h

Pot-Life

90 min

Coverage with 2 coats

8 - 10 m²/kg

Recoat after

min 24 max 48 h

Touch dry

6 - 8 h

Dry through

24 h

→ Diuizione

pronto all'uso

→ Resa

8 - 10 m²/Kg con 2 strati

Unit size
A_ Transparent

1 kg

5 kg

B_ Hardener

1 kg

5 kg

Note

Colours
0000 Transparent

Curing ratio
100:100 in weight

Hardener B
1873 HARDENER for ACRYLICS NON-YELLOWING

Technical data sheet

it

en

Share on

Suggested products

1110 SMALTO PER PISCINE

Chlorinated rubber enamel

0887 EPOX PAVIMENTI IDRO

Multi-surface water-thinnable epoxy enamel

1829 EPOX GRES

Epoxy enamel for floors