0887 EPOX PAVIMENTI IDRO
Building
specific productsMulti-surface water-thinnable epoxy enamel
Two-component epoxy enamel featuring good chemical resistance and excellent adhesion to structurally sound concrete; it forms a barrier waterproof and oil-proof film.
It was specifically developed to make industrial concrete floors resistant to stains and dust-free, as in garages or warehouses where a good surface is required for pedestrian and light vehicle traffic (forklifts with rubber wheels).
Application
It can be applied, after proper preparation of the support, even on masonry and plasterboard as a finishing for fine quality interiors, or on metal substrates prepared with a suitable anticorrosive primer. The product is also suitable for outdoor applications, if over-coated with PAVIPIU’ finishing code 1943. Suitable for painting environments where food is present, according UNI 11021:2002 standard concerning the HACCP methodology.
Technical data
Dry film aspect
semi-matt
Dilution
with water 5 - 10%
Max chemical resistance
after 10 gg
Allowing foot traffic
after 3 gg
Pot-Life
90 min
Coverage with 2 coats
3 - 4 m²/Kg
Recoat after
24 - 36 h
Touch dry
12 - 16 h
Dry through
24 - 36 h
Recommended thickness
100 μm dry film
→ Reduction
5 - 10% with water
→ Cover rate
3 - 4 m²/Kg with 2 coats
Unit size
Converter
4.25 kg
17 kg
Colours
20 kg (min. order 6 pcs)
Note
Curing ratio: 100:20 in weight
Hardener B: 4725 HARDENER for EPOX PAVIMENTI