1943 PAVIPIU’
Industry
specific products2K polyurethane clear coat for floors
Two-component polyurethane transparent finishing. Combined with aliphatic isocyanate, it produces a non-yellowing film, which has high gloss effect, excellent resistance to chemicals and to abrasions. It can be used both indoors and outdoors and can be applied as a protective on epoxy painting cycles for exteriors as well as on old paints, well adhering and able to accommodate over-painting with the product. The product offers excellent walkability and driveability.
→ High quality gloss
→ Non-yellowing
→ Excellent resistance to chemicals and to abrasions
Application
It is indicated for all spots where frequent cleaning and easy maintenance are required. It can also be used on a cement-based screed with anti-dust effect, as reported below. To obtain a satin and non-slip finishing it's possible to add PAVIPIÙ with the texturizing paste according to the indication given in the Technical Data Sheet. This solution is only suitable for surfaces pre-colored with epoxy enamels.
Tools
Roller, Brush for small area or corners profiling
Technical data
Dry film aspect
glossy
Sheen
95 - 97 Gloss 60°
Dust free
30 min
Max chemical resistance
after 7 days
Allowing foot traffic
after 24 - 36 h
Pot-Life
90 min
Recoat after
min 24 max 48 h
Touch dry
6 - 8 h
Dry through
24 h
Smoke production classification
s1
Slippage resistance (DIN 51097)
Classification A
Slippage resistance (DIN 51130)
Classification R9
Slippage resistance (B.C.R.)
dynamic friction coefficient > 0.4
→ Dilution
ready to use
→ Cover rate
8 - 10 m²/Kg with 2 coats
Unit size
0000 Transparent
5 kg A
1 kg A
Note
Curing ratio: 100:100 in weight
Curing ratio slip resistance: 100A + 100B + 16 paste in weight
Hardener B: 1873 HARDENER for ACRYLICS NON-YELLOWING
