1836 FONDO FINITURA ACRILICO SEMI OPACO DTM
Industry
primer-finishTwo-pack anticorrosion primer-finish, adhesion to iron, galvanised steel plate and aluminium
Semi-matt base-finish based on acrylic resin and isocyanic adduct. It is suitable for products in general when a good anticorrosive power is to be obtained with a high aesthetic appearance finish and when excellent resistance to the exterior is required. It has a good solidity at high temperatures (90/100°C) for a continuous service of three hours. The light colors (pure white) if submitted for long periods at such temperatures, could present a slight yellowing.
→ Semi-matt
→ Direct adhesion
→ Anticorrosive
Application
Suitable for iron, galvanised steel plate, aluminium, PVC, fibreglass.
Tools
Spray gun
Technical data
Dry film aspect
semi-gloss
Sheen
35 - 40 Gloss 60°
Oven drying
60 min - 60°C
Dust free
10 min
Pot-Life
90 min
Touch dry
2 - 3 h
Dry through
24 h
Recommended thickness
See TDS
Flash-off
5 - 10 min
→ Dilution
10 - 15% with 1611 DIL EXTRA PU
→ Cover rate
6 - 7 m²/kg with 2 coats referred to a dry thickness of about 50 μm
Unit size
0000 Converter
14 kg
3,5 kg
Colours
20 kg (min. order 6 pcs)
Note
Curing ratio: 100:15 in weight
Hardener B: 1873 for ACRYLIC/PU NON-YELLOWING