1954 ACRIL-PU OPACO
Industry
finishesTwo-component matt acrylic top-coat
Matt finish made of acrylic-polyurethane resin and isocyanate adduct. Its formulation is such that it allows you to obtain finishes with an extremely smooth effect.
Application
The product can be used in industrial cycles, machine tools and in general where good aesthetic performance is required. The addition of ADDITIVO AGGRAPPANTE PER VETRO cod. 1901 allows the application of the product on glass supports.
This product is part of a paint system in compliance with the fire protection requirements of marine Equipment Directive MED 2014/90/EU including the requirements and testing standards of Regulation (EU) 2024/1975.
Tools
Spray gun
Technical data
Dry film aspect
matt
Sheen
20 gloss (Gardner 60°)
Dust free
15 - 20 min
Max chemical resistance
after 7 days
Pot-Life
1,5 h
Touch dry
2 - 3 h
Dry through
24 h
Recommended thickness
60 - 80 μm dry film
→ Dilution:
15-20% with 1653 DIL PER ACRILICI/1611 DIL EXTRA PU/1624 DIL LENTO UNIV. IND
→ Cover rate:
5,5 m²/kg with 2 coats
Unit size
0000 Converter
14 kg
2,8 kg
0,7 kg
Note
Curing ratio: 100:25 by weight
Hardener B: 1873 per ACRILIC/PU ININGIALLENTE, 1882 per ACRILICI/PU ININGIALLENTE RAPIDO
